Scroll frame components are generally not interchangeable between manufacturers. Those that use bolts on the ends do not use the same sizes bolt. If you already have a brand it's best to stick with that brand. Or contact us to check on compatibility.
As these are made by Dan in Alabama and we love his product. Given it's just Dan making them if we are out of stock, it takes several weeks to get them. Those we know we are waiting on are marked as (BO). The sizes below are those we've decided to order. If you need another size, please contact us at the shop and we can most likely add it to our next order with RolaFrame. You'll find the stands and the Accessory Arm on our Stands page. We have a video on our YouTube channel on how to put their scroll frames together that you might want to check out.We are now ordering RolaFrame scroll frames. The sizes below are what we plan to stock but if you need another size, please contact as there is a huge range of options, especially for the rollers. RolaFrame uses tiny nails to hold your work in place and while that sounds scary, it actually works quite well. The rollers are held to the bars with bolts & wing nuts, so this system does not require knobs, although you use the K's Creations Mini Tri-knobs (see below) in place of the wing nuts. There is a wood wing nut tool, which helps you tighten the wing nuts if you find it hard to do.
![Needle In A Haystack - Scroll Frames & Slate Frames (3) Needle In A Haystack - Scroll Frames & Slate Frames (3)](https://i0.wp.com/www.needlestack.com/../../images/photos/Inventory/Accessories/RolaFrame_Set.jpg)
![]() | ![]() |
![]() | ![]() |
![]() |
![Needle In A Haystack - Scroll Frames & Slate Frames (9) Needle In A Haystack - Scroll Frames & Slate Frames (9)](https://i0.wp.com/www.needlestack.com/../../images/photos/Inventory/Accessories/RolaWingNutTool.jpg)
![Needle In A Haystack - Scroll Frames & Slate Frames (10) Needle In A Haystack - Scroll Frames & Slate Frames (10)](https://i0.wp.com/www.needlestack.com/../../images/photos/Inventory/Accessories/KC-TriKnobMini.jpg)
K's Creations - Mini tri-Knobs 4pk
These mini tri-knobs will fit RolaFrame bar & stand bolts and EZ Stitch & Yarn Tree scroll frame rods.
We carry the individual components to create the size scroll frame you need, or to add to one you already own. The rods have webbing attached to them and you either sew your project to the webbing or use the No Baste System to attach it to the webbing.
In October 2017 Embroidery Central purchased American Dream Products (which closed in August 2017). As of May 2019, we are able to get some of the components but not all of them. You can use the Yarn Tree Rods, which are interchangeable with the EZ Stitch Rods as the bolt size is the same.
Yarn Tree has the EZ Grip Knobs that will work with the EZ Stitch rods. If you find that you strip the wood knobs, this will prevent that from happening (see above).
Bars
Rods & Knobs
![Needle In A Haystack - Scroll Frames & Slate Frames (14) Needle In A Haystack - Scroll Frames & Slate Frames (14)](https://i0.wp.com/www.needlestack.com/../../images/photos/Inventory/Accessories/EZ-Stitch_NoBaste.png)
No Baste
The back is sticky so you can peal the covering off and stick it to either your scroll rods (webbing) or your project. While similar to Velcro brand hook & loop tape, this has a thinner profile and is a narrower as well - well suited to needlework. You do not need to remove it from the webbing unless it is worn out. It should be removed from your stitching project (cut off the area it is stuck to) before you have it finished into it's final product.
In addition to K's Creations stands, we carry their Belt Frames (horizontal scroll frame) as well as several sizes of their Perfect Tension Side Bars. We can special order any of their scroll frame components as well. If you are looking for a different size Belt Frame we can see about having one made for you.
![Needle In A Haystack - Scroll Frames & Slate Frames (15) Needle In A Haystack - Scroll Frames & Slate Frames (15)](https://i0.wp.com/www.needlestack.com/../../images/photos/Inventory/Accessories/KC-PTBars.jpg)
Perfect Tension II bars allow for more tautness in your scroll frames. We stock the unstained bars.
We have a YouTube video for how to use the PT bars. Be sure to check it out.
The older Perfect Tension bars with the upper black plastic section are no longer manufactured.
Perfect Tension II bars are all wood except for the bolts and screws.
![Needle In A Haystack - Scroll Frames & Slate Frames (17) Needle In A Haystack - Scroll Frames & Slate Frames (17)](https://i0.wp.com/www.needlestack.com/../../images/photos/Inventory/Accessories/KC-SideBarKnobs.jpg)
Regular side bars with knobs can be used as well if you don't need to have
the extra tightening power of the Perfect Tension side bars.
if used with wing nuts. K's Creations packages their rods for us with wing nuts.
K's Creations rods will NOT work with EZ Stitch bars.
![Needle In A Haystack - Scroll Frames & Slate Frames (18) Needle In A Haystack - Scroll Frames & Slate Frames (18)](https://i0.wp.com/www.needlestack.com/../../images/photos/Inventory/KsCreations/KC-TriKnobs.jpg)
Tri-Knobs, 4pk
The regular size only fit K's Creations and Needlework System 4 rods.
Order the Yarn Tree EZ Grip Knobs above for EZ Stitch rods.
![Needle In A Haystack - Scroll Frames & Slate Frames (19) Needle In A Haystack - Scroll Frames & Slate Frames (19)](https://i0.wp.com/www.needlestack.com/../../images/photos/Inventory/Accessories/KC-BeltFrame.jpg)
K's Creations Belt FrameFor projects that are very wide, where a traditional scroll fame isn't ideal.
Available in 6", 9", 12", 16", 18", 22" & 28" sizes.Custom sizes also available by special order.
Use K's Creations Standard base ifyou wish to mount it into a base.Base does notcome with Belt Frame.
9" - $66.00/ea
12" - $78.00/ea
16" - $90.00/ea
18" - $94.00/ea
22" - $98.00/ea
28" - $135.00/ea
9in:
12in:
16in:
18in:
22in:
28in:
New from K's Creations a tool to help you get your scroll frame tighter. Attach either to one rod or one to the top rod and one to the bottom rod (offset them if you use both). Then use the tool provided to allow you remove the slack from your fabric or canvas.
It comes with an Allen wrench to lock the ring to your rod and a tightening tool to allow you to crank on the ring to move the rod. You can get the slack out of fabric or canvas with your hands, but not nearly as much as you can with this tool! This will only work on rods with a diameter of 11/16". So it will work on the K's Creations rods and Needlework System 4 rods. It will NOT work on EZ Stitch or Rola Frame rods as they are too thin. You will need to have a minimum of 1/2" clearance from the edge of the fabric to the bar. It may require you cutting any twill tape attached to the rod since it needs to make contact with the wood or you'll need to make sure it's very, very tight against the twill tape. You should expect to see an indentation in the wood when it's tight enough. Because you use the collar to rotate the rod even more than you can do by hand, if it is not tight against the wood, it won't work.
We have a new YouTube video on how to use the Tension Collar.
![Needle In A Haystack - Scroll Frames & Slate Frames (22) Needle In A Haystack - Scroll Frames & Slate Frames (22)](https://i0.wp.com/www.needlestack.com/../../images/photos/Inventory/KsCreations/KC-RodTight.jpg)
![Needle In A Haystack - Scroll Frames & Slate Frames (23) Needle In A Haystack - Scroll Frames & Slate Frames (23)](https://i0.wp.com/www.needlestack.com/../../images/photos/Inventory/KsCreations/KC-RodTight_Pair.jpg)
You'll find the scroll frame unit for the floor stands on our Stands page
.
Please note that the Rods from NS4 will NOT work with the
K's Creations Perfect Tension Side Bars as the bolt is just a little to short.